What's included
- Marking out the chase route based on the agreed wiring plan
- Chasing walls for cable in concrete, brick, or block
- Chasing for new outlet, switch, and junction box locations
- Covering furniture and floors with film during the work
- Removing the main construction debris after chasing
- Laying the cable into the finished chase, by arrangement
When you need this
- Concealed wiring is planned in a new or renovated apartment
- An outlet, switch, or light fixture needs to move to a new spot
- Old exposed wiring is being hidden inside the wall
- New circuits are being added for appliances that weren't there before
- Renovation is still at the rough-in stage — the best time for chasing
How the work is done
Pricing
| Service | Price |
|---|---|
| Wall chasing for cable, per linear metre | from 3,000 KZT |
| Surface-mounted cable run, per linear metre | from 1,500 KZT |
| Cable run in conduit, per linear metre | from 2,000 KZT |
| New electrical point, materials not included | from 5,000 KZT |
Chasing concrete can cost more than chasing brick or block — the exact price depends on the wall material and the amount of work. Cable, trunking, and materials are billed separately unless stated otherwise.
Chasing is needed almost every time wiring is hidden inside a wall rather than run on the surface. The depth and width of the chase are sized to the cable that will go inside it — too narrow a channel won't let the cable sit freely, and too wide one weakens the wall without reason.
Wall material has a direct effect on speed and cost. Brick and aerated block chase faster; concrete is denser and takes more time, which is why its per-metre price is higher. Load-bearing walls have limits on where chasing is allowed — deep or horizontal chases aren't permitted there, and this is factored in when the route is marked out.
The cable can be laid right after chasing, or the channel can be left ready for a later installation — this is agreed when the scope of work is set.
Completed work carries a warranty of up to 3 years.
Frequently asked questions
How much does wall chasing for cable cost?
From 3,000 KZT per linear metre. Chasing a concrete wall usually costs more than brick or block — the electrician gives an exact price after seeing the wall.
How dusty and noisy is it?
Wall chasing is one of the dustiest and noisiest jobs in electrical work. The electrician covers furniture and floors with film and clears the main debris afterward, but some fine dust left in the room is normal — a final wet clean is best left until after the renovation is finished.
Can a concrete panel wall be chased?
Yes, but it's slower and more expensive than brick or block, and needs care to avoid hitting rebar. The cost for concrete is assessed separately.
Is the cable run included in the chasing price?
No, they're separate line items with different rates — chasing is from 3,000 KZT per metre, and the cable run is billed separately, from 1,500 KZT per metre surface-mounted or from 2,000 KZT per metre in conduit. If both are needed, they're quoted together.
Is it better to chase before or after finishing work?
Before the final finishing — the rough-in stage of renovation is the most convenient time, since the dust and debris from chasing won't damage finished surfaces. Chasing in an already-finished room is possible but needs extra protection and care.