What's included
- Replacing an old or broken 1-2 gang switch with a new one
- Installing a switch at an already-prepared point
- Fitting a switch at a new location, including a cable run if needed
- Installing two-way switches for controlling a light from two or more points
- Fitting switches with a dimmer or timer
- Checking contact and correct operation under load after installation
When you need this
- A switch sticks, works only intermittently, or clicks with no result
- A switch sparks or feels noticeably hot
- A switch ended up in an awkward spot — after rearranging furniture, for example
- You need to control a light from two points (room entrance and exit, a staircase)
- You're planning to install a dimmer for adjustable brightness
- A renovation is changing where light points are located
How the work is done
Pricing
| Service | Price |
|---|---|
| Replacing a 1-2 gang switch at a ready point (unit) | from 2,500 KZT |
| Mounting box installation (unit) | from 1,500 KZT |
| New electrical point, materials not included (point) | from 5,000 KZT |
Cost depends on the switch type (single, double, two-way, dimmer) and whether the connection point is already prepared.
A switch is a mechanical part that wears out with use, so sooner or later it starts to stick or click without effect. A sparking or hot switch is a different matter entirely — it's a reason to replace it right away, not something to push a bit harder on.
When fitting a new switch, the electrician considers not just the button type (single, double, illuminated) but also the wiring setup — standard, two-way, or intermediate if the light needs to be controlled from several points. For dimmers, it's worth checking compatibility with the installed bulbs beforehand.
If furniture or a doorway is being moved, it often makes sense to relocate the switch to a more convenient spot at the same time — this can be handled within the same job as the replacement.
Completed work carries a warranty of up to 3 years.
Frequently asked questions
How much does it cost to replace a switch?
Replacing a 1-2 gang switch at an already-prepared point is from 2,500 KZT. If the switch needs relocating or a new point is required, the cost of a mounting box and cable run is added.
What is a two-way switch and why would I need one?
A two-way switch lets you turn the same light on and off from two different points — say, at a bedroom door and by the bed, or at the top and bottom of a staircase. It needs a specific wiring setup, so the price is confirmed separately.
Can a regular switch be replaced with a dimmer?
In most cases yes, as long as the bulbs in use are dimmer-compatible — this is checked separately. The electrician can advise and fit it in the existing spot.
Why does a switch spark or click without doing anything?
This is usually caused by a worn internal mechanism or a loose contact on the circuit. Either way, it's worth replacing the switch rather than waiting for it to fail completely.
Do you work in the evenings or at night?
Yes, we work 24/7 — night and emergency call-outs are billed at a higher rate (from 6,000 KZT) than a daytime visit.